*Detecting all of bugs and locators with Mobile, unicom, telecomCard(2G,3G,4G)
*Detecting GPS Locator packet in high speed uploading
*Detecting 1.2G/2.4G wireless camera
*Detecting hidden 5.8GHZwireless camera and Wirelesseaves dropping
*Detecting locator and gps tracking in sleeping state
This product adopts digital receiving mode,it is different from others on the market,not only broaden the detection frequency,but also avoid that the interference from all kinds of signal in the life, enhance the sensitivity widely.It owns extreme dynamic regulation of sensitivity,no matter how strong of the transmit signal,we can locate it easily viaknob,so the VS
VS-M8 is the most advanced portable wireles signaldetection device,special for CDMA signal. As you know,normal radio wave cann’ t detect the CDMA signal,or you can use cellphone to testthe sensitivity via dialing.CDMA Mobile phone agreement is developedvia US ARMY, it is one of Radio frequency hopping,the features are that CDMA ( Code Division Multiple Access ),Transmission power is very small, it is hard to intercept by normal wireless receiving device.But most of the GPS Trackers use CDMA or WCDMA card basically,so VS-M8 is the best for you.
M8 use German advanced technology, it is mainly for kinds of bugs,gps trackers, detectaphons, wireless pinhole camera, car gps tracker, Mobile phone undercover software, Wireless pinhole camera, Casino scam and so on,so we develop safety equipment directionally. What’ s more,our detector can meet military/police magnet of GPS,it solves the problems that if the gps is in long sleep,normal detector can not detect the GPS.
radio wave detection
*Mode switch, push it to left RF,turn it on, Power indicator light,adjust the sensitivity to light the thrid Led,then it can start to working If
receving strong environmental signal,pls callback knob.
*If the signal is full with beep sound,also the sound will become more rapid with the strong signal.
*The light bar is more full and brighten, the sound is more rapid,it means it is near to the suspicious goods.And callback knob at this time,vibrating the detector around,once get the stron signal,then callback the knob,it is easy to lock the target.
Automstic Search
*Adjust the light bar to the second light extinguish,press the button of automatic Search,
Mode switch blue light flash,enter into the automatic search status,then you will get the reminder from light bar,once get one,the light bar Will bright one light,if received 3 time in total,the third light will also bright,also will have Signal logic analysis,it will alarm with sound and licht flash once up to the condition.Press button(Automatic Search),exit automatic Search mode.
Magnet detection
*Many of detectors sleeping time is very long,even a few hours or ten
hours more only send one signal, detectors is hard to detect,but in
order to install easily,all of them with bulit-in One-way magnet.
*Mode switch, Push it to the right MA, adjust Sensitivity tomaximum,pls install the magnetic antenna,there is a light on theantenna,then adjust the balanced potentiometer,the sixth of liqhtextinguish.Because of high sensitivity,detector will be effected bygeomagnetism and Surface remanence of iron products,will havemistake reminder,pls adjust the knob to fit the environment.
*Detecting sensitive element is installed on the head of antenna withlight,using the antenna to find every possible corner,then easy to find
Main Feature:
*Professional radio wave detection device,high sensitivity,largefrequency detection with Precision
*With Searchlight magnetic sensor antenna,easy to use,easy to search
the cars,office,room anywhere,even people is hard to touch or seeit.the detector is reliable and accurate via sound and light alarm.
*Detecting all of bugs and locators with Mobile, unicom, telecomCard(2G,3G,4G)
*Detecting GPS Locator packet in high speed uploading
*Detecting 1.2G/2.4G wireless camera
*Detecting hidden 5.8GHZwireless camera and Wirelesseaves dropping
*Detecting locator and gps tracking in sleeping state
*Wireless detection automatic search logic analysis memory function
Parameters:
*Frenquency Range: 1MHz-12GHz
*Detection Dynamic Range: >73Db
*Detection Sensitivity: <0.03mw(Main Frequency )
Detection Range:
2.4GHz Wireless Camera: 25m²(standard 10mW camera)
1.2GHz Wireless Camera: 36m² (standard 10mW camera)
Cellphone Signal 2G,3G,4G: 5-25m²
*Magnetic Detection Sensitivity: 50mm–150mm
*Indicating Method: 10 Level LED Luminous indicator/Variation
Sound indication
*Power : Bulit-in 3.7V1500mAHlithium polymer battery
Working Current:25-35mA Last Time:20-45H
*Material : Aluminium Alloy N.W: 175g
Volume: 125×52.5×21.5mm
*Due to high sensitivity,pls turn the communications and digitaldevices off,but there is signal from Cell phone base station, TV stationon the road of city,plsdrive the car to the place in weak signal,thenstart working.
*lf the detector will alarm sometimes,but confirmed there is nosuspicious inthe room,there are a few of possibilities:
1.Your own communication equipment is timed automatically with the base station pair code
2.The suspect is next door or the next door is dialing
3.Too close to the wireless router
Source:
cell phone detector 2G 3G 4G GSM CDMA WCDMA detector
Need repost your products or artices, click Here
Comments
Post a Comment