2016 new emp jammer for slot No15 with remote control from C.T.S Technology

2016 new emp jammer for slot No15 with remote control  Products circuit principle

At price 150usd/pc  136Euro/pc 
1, through the power management chip DC – DC booster circuit, the original 12.6 V power booster to 36 V and then sent via the remote control instruction of different frequency boot device, device receives the different instructions after internal microcontroller, the output of a specific frequency signal control transistor for 36 V power supply to power oscillation signal processing, sideways to the appropriate frequency.
2, through the special high-frequency RF transistor pulse oscillation circuit, enlarge the power signal after finishing processing.
3, through the low frequency coil output rf signal sorting again super radio signals. Working on separator principle: game consoles and separator can emit high frequency electromagnetic wave, the console control chip on the motherboard have points, with game consoles can interfere with the game board, coin, key points, high frequency magnetic field signal can penetrate the inside of the machine wire, resistor, capacitor, chip, IC, transistor, SCM, etc., after the interference on the points on the integrated circuit receives signals or refund money, the machine will automatically on or refund COINS, electric equipment is made up of thousands of electronic components, electrical engineer is the most headache is electromagnetic interference, especially in high frequency, ultra high frequency electromagnetic interference, the problem is now and in the future is difficult to conquer

jammer slot machine No15
The power supply voltage: 12.6 V
Working voltage: 36 v
Working pattern: mixing pulse
Antenna pattern: built-in + strengthen external – removable
Instrument color: transparent
Size: 85 x50x20mm
Instrument power: 26 w
Power switch: pull plug type
Cooling modes: internal heat sink
Trial version: single pokies, attachment slot machines, roulette machine, COINS, paper money, lottery type
Characteristics of instrument: the instrument USES the microcomputer control technology, 12 kinds of frequency is divided into three gear, remote control to realize human-machine separation more reliable, the crystal one encapsulation, waterproof shockproof tamper-proof, crystal packaging more pressure, heat faster
Instrument power supply:
1, 12 V single-hole charge note: special charger
2, the use of three series of A large capacity lithium battery, electronic booster (constant pressure after booster 36 v), larger capacity, durable
3, battery terminal USES the self-recovery fuse, higher safety performance
4, the charger current 350 ma, the biggest battery faster

No15 emp jammer manual:
1. put battery on, put antenna on
2. take remote control out
3. press button
4. Launch:
1, enameled wire coil is made of high quality, precision round, more standard and more stable
2, imported high power transistor (power stronger)
3, the latest debug method, power is more powerful
Frequency control methods:
1 “(the default boot) :
A key: direct frequency output
Key: B 3 hz + 420 MHZ mixing
C key: 6 hz + 420 MHZ mixing
D key: 9 hz + 420 MHZ mixing
2 files (A + B key switch according to the indicator lights flashing at the same time two complete)
A key: 12 hz + 420 MHZ mixing
Key: B 15 hz + 420 MHZ mixing
C key: 18 hz + 420 MHZ mixing
D key: 21 hz + 420 MHZ mixing
3 files (C + D keys at the same time, according to the indicator light flashing switch four complete)
A key: 24 hz + 420 MHZ mixing
Key: B 27 hz + 420 MHZ mixing
C key: 30 hz + 420 MHZ mixing
D key: 33 hz + 420 MHZ mixing
Switch back to the default system: B + D key indicator long on while the switch to complete
Note: the instrument power is larger, please do not start for a long time

Source: 2016 new emp jammer for slot No15 with remote control


Need repost your products or artices, click Here

Comments